Filter
Top Products
79
Operation Procedures for Functions
3
(2) Verifying the parameters
All the parameter settings stored in the FR-PU07 are verified with those which are stored in the inverter.
REMARKS
Verification cannot be performed between different inverter series.
1
Refer to page 77 and copy the parameter settings of
the verify source inverter to the FR-PU07.
2
Connect the FR-PU07 to the inverter to be verified.
3
Press .
The function menu appears.
4
Select the "multiple
copies".
Using / , move the
cursor to "12 PRCpy set" and
press .
5
Select the copy area.
Point the cursor to the copy
area that stores the
parameter settings required
verification, and press
.
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
12 PRCpy set
10 Selectop
11 Option
9 S/W
2 Copy area 2
3 Copy area 3
1 Copy area 1
6
Select the "Verifying".
Using / , point the
cursor to "3 Verifing" to press
.
7
Verification of the parameter
settings is selected, and the
confirmation screen for
verification is displayed.
8
Press .
Start verification of parameter
settings stored in the FR-
PU07 and parameter settings
of the inverter.
2 Write VFD
1 Read VFD
Copy area 1
3 Verifing
Verify Area 1
WRITE:Executing
012
ESC:Cancel
Verifying
Verifying
Param Copy
Please Wait