Filter
Top Products
32
Frequency Setting
2.2.3 Precautions for frequency setting
1) Pr. 79 Operation mode selection must have been set to switch to the PU operation. (Refer to the inverter
instruction manual for details of Pr. 79 .)
2) In the monitor mode, you cannot make the direct setting (Refer to page 30) to set the running frequency.
Perform the step setting (Refer to page 31) and press , or press to display the frequency setting
screen before frequency setting.
Frequency setting screenDeselect monitor modeMonitor mode
30.00Hz
STF FWD PU
READ
:
List
Freq Set
SET 0.00Hz
0~400Hz