Filter
Top Products
28
Monitoring Function
2.1.5 Using the parameter to change the monitor (Pr. 52)
To change the third monitor (output voltage monitor), set Pr. 52 DU/PU main display data selection.
(Note that setting "17" (load meter) *2, "18" (Motor excitation current) *1 *2, and "24" (Motor load ratio)
change the output current monitor.
"Output voltage monitor" monitor displays from the first priority monitor using .
*1 Cannot be monitored for the FR-F700 series.
*2 Cannot be monitored for the FR-E700, D700 series.
REMARKS
Refer to the instruction manual of each inverter for monitor description.