Filter
Top Products
77
Operation Procedures for Functions
3
• Reading the parameter settings of the inverter
and storing them to FR-PU07.
1
Connect the FR-PU07 to the copy source inverter.
2
Press .
The function menu appears.
3
Select the "PRCpy set".
Using / , move the
cursor to "12 PRCpy set" and
press .
4
Select the copy area.
The copy area selection
screen is displayed. Then,
move the cursor to any one of
1 to 3 and press .
(Parameter settings of each
inverter (three inverters in
total) can be copied to the
area 1, 2 or 3.)
5
Select the "READ".
Using / , move the
cursor to "1 Read VFD" and
press .
2 PU Oper
3 Pr.List
1 MONITOR
4 Pr.Clear
12 PRCpy set
10 Selectop
11 Option
9 S/W
2 Copy area 2
3 Copy area 3
1 Copy area 1
1 Read VFD
2 Write VFD
Copy area 1
3 Verifing
6
Give a name.
You can name each of copy
areas 1 to 3.
Select the
characters with /
and set them with
.
Press to set the name for
the
area.
7
Write to the copy area of
FR-PU07.
The screen for confirming the
overwriting of the data in the
FR-PU07 is displayed.
8
Press .
The parameter settings of the
inverter are stored.
When canceling, press
.
:Select Char
READ:Decide Char
Name:012
WRITE:DecideName
Overwrite area 1
WRITE:Executing
012
ESC:Cancel
Reading
Reading
Param Copy
Completed