Filter
Top Products
29
Monitoring Function
2
* The monitor displayed at powering ON is the first priority monitor. Refer to page 26 for the setting method
of the first priority monitor.
1) For the set value of "17, 18, 24", their monitors are displayed at the second monitor instead of output
current monitor.
2) For the set value of "19 to 23, 25
·····
", their monitors are displayed at the third monitor instead of output
voltage monitor.
Factory setting
REMARKS
The setting range of Pr. 52 DU/PU main display data selection differs according to the inverter.
Refer to the inverter instruction manual for details.
First priority monitor
(Output frequency monitor) (Output current monitor) (Output voltage monitor)
First
Second
Third
Second monitor Third monitor
2)
1)
0.00
Hz
--- STOP EXT
READ
:
List
0.00
A
--- STOP EXT
READ
:
List
0.00
V
--- STOP EXT
READ
:
List
Output frequency monitor
First priority monitor
Monitor of the set value "17, 18, 24"
Output voltage monitor
Third monitor
Second monitor
First monitor
Output frequency monitor
Third monitor
Monitor of the set value "19 to 23, 25 "
Output current monitor
Second monitor
.....