Filter
Top Products
37
Setting and Changing the Parameter Values
2
2.3.4 Selecting the parameter from User List to change the set value
If a parameter is registered to User List, the parameter can be read from User List and changed. (For
registering the user group, refer to page 39 .)
Example: When changing 5s to 180s at the Pr. 8
Deceleration time setting
* If is pressed when an incorrect setting value is
input, the display returns to the list display "5".
1
Press .
The frequency setting screen
appears, and operation mode
changes to PU operation mode.
2
Press .
The parameter unit is in the
parameter setting mode.
3
Change the screen using
.
4
Select a User List.
Using , point the
cursor to "User List".
5
Press .
The list of the parameters
registered to User List
appears.
Freq Set
SET 0.00Hz
0~400Hz
SETTING MODE
0~9:Ser Pr.NO.
Select Oper
3 User List
2 Pr.List
1 Appl.Grp
4 Param Copy
1 Appl.Grp
3 User List
2 Pr.List
4 Param Copy
75 RES Mode
8 Dec.T1
6
Select the parameter.
When moving the cursor
using and pressing
at "Dec.T1", the present
set value is called.
7
(1) Direct setting
Press .
*
Enter the desired value.
Or
(2) Step setting
Press .
Display "180" using .
8
Press .
The set value is changed.
9
Press to display the next parameter.
8 Dec.T1
5.0S
0~3600
8 Dec.T1
5.0S
0~3600
180S
180.0S
180.0S
8 Dec.T1
Completed