Filter
Top Products
54
Overview of Function Menu
3. Pr.List
The parameter menu appears, and you can perform "parameter setting", "list
display", "parameter change list display" and "initial value list display".
Page 62
4. Pr.Clear
The parameter clear menu appears, and you can perform "parameter clear" and "all
clear".
Page 65
5. Alarm Hist
This function displays history of past eight faults (alarms).
Page 67
6. AlarmClear
This function clears all the fault (alarm) history. Page 68
7. Inv.Reset
This function resets the inverter. Page 69
8. T/Shooting
The inverter displays the cause of mismatch between inverter operation and control/
setting or the cause of an inverter fault.
Page 69
9. S/W
This function displays the software control number of the inverter.
-
10. Selectop
FR-PU07
This function displays the signals assigned to the I/O terminals of the
control circuit and the ON/OFF states of the signals.
Page 74
FR-PU07BB
battery mode
This function displays the signals assigned to the I/O terminals of the
control circuit. The ON/OFF states of the input signal are not
displayed.
11. Option
FR-PU07
This function displays the option fitting states of the option connectors
1 to 3.
Page 75
FR-PU07BB
battery mode
Option cannot be displayed since it cannot be recognized.
12. FRCpy set
The function can perform the "parameter copy" (read, write, verification).
Page 76
REMARKS
The functions vary with the inverter model and may be invalid for some inverters.
Function Menu Description Refer To