Filter
Top Products
PowerLogic™ PM5300 series user guide Chapter 3—Hardware Reference
© 2014 Schneider Electric All Rights Reserved 13
Chapter 3—Hardware Reference
This section supplements the meter’s installation sheet and provides additional
information about the meter’s physical characteristics and capabilities.
Models, Features and Options
Table 3 –1: PM5300 Series - Models, Features and Options
Functions and Characteristics
Table 3 –2: Functions and Characteristics
Features and Options
PM5300 Series
PM5310 PM5320
PM5330
PM5331
PM5340
PM5341
Installation
Fast installation, panel mount with integrated
display
Accuracy Cl 0.5S Cl 0.5S Cl 0.5S Cl 0.5S
Display
Backlit LCD, multilingual, bar graphs, 6 lines, 4
concurrent values
Power and energy metering
3-phase voltage, current, power, demand,
energy, frequency, power factor
Multi-tariff 4 4 4 4
Power quality analysis
THD, thd, TDD
Harmonics, individual (odd) up to 31st 31st 31st 31st
I/Os and relays
I/Os 2SI/2DO 2SI/2DO 2SI/2DO 2SI/2DO
Relays 0 0 2 2
Alarms and control
Alarms 35 35 35 35
Set point response time, seconds 1 1 1 1
Single and multi-condition alarms
Communications
Serial ports with modbus protocol 1 - 1 -
Ethernet port with Modbus TCP protocol - 1 - 1
MID ready compliance,
EN50470-1/3, Annex B and Annex D
Class C
PM5331 PM5341
General PM5300 Series
Use on LV and MV systems
Basic metering with THD and min/max readings
Instantaneous rms values
Current (per phase and neutral)
Voltage (total, per phase L-L and L-N)