Filter
Top Products
PowerLogic™ PM5300 series user guide Chapter 7—Alarms
© 2014 Schneider Electric All Rights Reserved68
Setting Up 1-Second Alarms (continued)
NOTE: The Over Demand alarms are applicable for systems in which the energy is
delivered to the customer only.
17. Press
▼ to select Priority, then
press Edit.
18. Press + and - to scroll through
priority options None, High,
Medium, or Low.
NOTE: See “Alarm Priorities”
on page 66 for more
information.
19. Press OK to set the priority.
20. Press
▼ to select Select
Digital Output, then press Edit.
21. Press + and - to scroll through
the list of digital outputs to
associate with the alarm.
22. Press OK to select a digital
output to be associated with the
selected alarm.
23. If the selected digital output
already has an association that
will be lost by making the new
selection, a confirmation screen
appears.
— Press Yes to accept the
changes and return to the
previous screen.
— Press No to keep the
existing configuration in use
and return to the previous
screen.
24. Press
▲ to save all alarm
selections and return to the
previous screen.
25. Press ▲ to save all 1-second
alarm selections.