Filter
Top Products
62 © 2014 Schneider Electric All Rights Reserved
Chapter 6—Input / Output PowerLogic™ PM5300 series user guide
4. Move the cursor to point to the parameter you want to modify, then press Edit.
5. Press or to modify the parameter as required, then press OK.
6. Press to exit. Press Yes to save your changes.
Alarm / energy pulsing LED parameters available through the front panel
Parameter Values Description
Mode Off, Alarm, Energy
Disabled turns off the LED completely.
Alarm sets the LED for alarm notification.
Energy sets the LED for energy pulsing.
Pulse Wt. (p/k_h) 1 to 9999999
When configured for energy pulsing, this setting defines
how many pulses are sent to the LED for every 1 kWh,
1 kVARh or 1kVAh accumulated energy.
Parameter
Active Del
Select which accumulated energy channel to monitor and
use for energy pulsing.
Active Rec
Active Del + Rec
Reactive Del
Reactive Rec
Reactive Del + Rec
Apparent Del
Apparent Rec
Apparent Del + Rec