Filter
Top Products
PowerLogic™ PM5300 series user guide Chapter 4—Front panel display and meter setup
© 2014 Schneider Electric All Rights Reserved 39
7. Press to exit. Press Yes to save your changes.
Setting up regional settings
You can change the regional settings to localize the meter screens and display data in
a different language, using local standards and conventions.
NOTE: In order to display a different language other than those listed in the Language
setup parameter, you need to download the appropriate language file to the meter
using the appropriate firmware upgrade tool such as DLF3000. See “Downloading
Firmware” on page 104.
1. Navigate to Maint > Setup.
2. Enter the setup password (default is “0000”), then press OK.
3. Navigate to HMI > Region.
4. Move the cursor to point to the parameter you want to modify, then click Edit.
5. Modify the parameter as required, then press OK.
6. Move the cursor to point to the next parameter you want to modify, press Edit,
make your changes, then press OK.
7. Press to exit. Press Yes to save your changes.
Setting up the screen passwords
This can only be configured through the front panel. The factory-default setting for all
passwords is “0000”. Changing the default password for screens that are password-
Display setup parameters
Parameter Values Description
Contrast 1 - 9
Increase or decrease the value to increase or
decrease the display contrast.
Backlight Timeout (min) 0 - 60
Set how long (in minutes) before the backlight
turns off after a period of inactivity. Setting this to
“0” disables the backlight timeout feature (i.e.,
backlight is always on).
Screen Timeout (min) 0 - 60
Set how long (in minutes) before the screen turns
off after a period of inactivity. Setting this to “0”
disables the screen timeout feature (i.e., display is
always on).
Regional settings menu tree
Regional settings setup parameters
Parameter Values Description
Language
English US, French, Spanish, German,
Italian, Portuguese, Chinese, Russian
Select the language you want the meter to
display.
Date Format MM/DD/YY, YY/MM/DD, DD/MM/YY
Set how you want the date to be displayed,
e.g., month/day/year.
Time Format 24Hr, AM/PM
Set how you want the time to be displayed,
e.g., 17:00:00 or 5:00:00 PM.
HMI Mode IEC, IEEE
Select the standards convention used to
display menu names or meter data.
Maint
Reset
Meter
Comm
Alarm
I/O
Clock
Displ
Pass
Region
HMI
Setup