82 Chapter 4
Test Controller
User interface
The possible states in the CPU Summary Display are described in Table
20.
Table 20 Processor States
• 9=Display CPU Errors—Displays the errors for the currently selected
processor. When selected, the user is prompted for the processor as
follows:
Enter CPU [0-1f]:
CPU State Description
Not Available Denotes processor is not available for testing.
Running Denotes a test is currently running on this
processor.
Idle Denotes that no test is running on this processor.
Ready Denotes last subtest completed and ready for
next subtest.
Test Completed Denotes test completed execution on this
processor.
Error Detected Denotes test halted due to an error condition on
this processor.
Test Timeout Denotes a timeout detected during test execution
on this processor; the test is halted.
HW Reqs Not Met Denotes the hardware selected does not meet the
minimum hardware required for executing the
test.
User Halted Denotes user halted test.
Unexpected
HPMC
Denotes running test caused an HPMC; the test
is halted.
SW Deconfigured Denotes test automatically halted testing on this
processor, because of a software restriction.
