96 Chapter 4
Test Controller
Example of running diagnostics from Test Controller command line
Step 7. From the Hardware Selection menu shown below, select CPUs, option 1.
Selecting CPUs from Hardware Selection menu
Test Configuration Menu - Hardware Selection Display
0=Return to Test Configuration Menu
1=CPU Selection
2=SPAC Selection
3=SMAC Selection
4=STAC Selection
5=SAGA Selection
6=Node Selection
Step 8. At the following prompt:
Select CPUs: 0 2
Select the number of processors (CPUs).
After the number of processors is chosen, the Hardware Selection menu
reappears.
Step 9. From this menu select Return to Test Configuration menu, option 0.
Step 10. From the Test Configuration menu, the user can select option 9 to view
the changes.
Selecting classes and subtests
To select test classes and subtest, perform the following procedure:
Step 1. From the Test Configuration menu, select Select Classes, option 3.
Step 2. From the following prompt, select the test classes:
Enter class number:
