Chapter 4 99
Test Controller
Example of running diagnostics from Test Controller command line
Starting tests
To run the tests selected from the Test Controller main menu, select
Begin Test Controller Execution, option 1. The output is shown in the
example below:
Example of mem3000 execution
% Enter command: 1
Execution Starting.
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
..............................................................................
...........................................................
Execution Completed - No errors detected
Viewing the results
To review the results of the test, select CPU Summary Display, option 8,
from the Main menu.
An example of the results is shown below:
Example CPU Summary diaplay
Configuration Map
=================
CPUs : 0 1 2 3* 4 5 6 7 8 9 10 11 12 13 14 15
CPUs : 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
SPACs : 0* 1* 2* 3* 4* 5* 6* 7*
SMACs : 0* 1* 2 3 4 5 6 7
STACs : 0 1 2 3 4 5 6 7
SAGAs : 0* 1 2 3 4* 5 6 7
FAIL
CPU STATE COUNT SUBTEST TEST NAME
=== ===== ===== ======= =========
0 Test Completed 0 150 MEM3000 - EEPROM based memory tests
1 Idle n/a n/a n/a
2 Test Completed 0 150 MEM3000 - EEPROM based memory tests
