Furuno tztl12f Marine GPS System User Manual


 
1. SYSTEM INTRODUCTION
1-4
Notes on touch control operations
Waterdrops on the screen can cause mis-operation and slow touch response. Wipe
the screen with a dry cloth to remove the water.
This equipment uses a capacitive touch screen. Tap the screen with your fingertips
directly. Do not use sharp objects (needle, pen, nail) or a stylus pen. Be careful not
to scratch the screen.
The touchscreen cannot be operated while wearing gloves.
Do not put objects (adhesive-backed paper, etc.) on the screen. Mis-operation can
result.
Keep the equipment away from a radio antenna, fluorescent light, solenoid valve
and electronic devices to prevent unintended operation by noise.
The front panel is made of glass. If the front panel is damaged, do not try to repair
it yourself. Unauthorized repair will void the warranty. Contact your dealer about re-
pair or replacement.
The touch screen can be locked to prevent operation of the equipment. See the pro-
cedure below.
How to lock the touch screen
The touch screen can be locked to prevent unintentional operation.
With the power applied, press to show the [Power & Brilliance] window. Set the flip-
switch for [Lock Touch Screen] to the [ON] position to lock the touch screen, or the
[OFF] position to unlock the touch screen.