Filter
Top Products
2. PLOTTER
2-17
2.10.7 Alarms list
When an alarm is violated, you can see the name of the offending alarm on the
[Alarms] list. The list stores both warning and system messages. Open the home
screen, then tap [Lists] followed by [Alarms]. Active alarms are flashing and have a red
vertical bar at the let margin. Tap an active alarm to acknowledge it and stop the flash-
ing. Acknowledged alarms appear in the [HISTORIC] section. Tap the close button to
close the list.
2.11 Track
The track (or movement) of your ship is
plotted on the screen with position data
fed from the internal GPS navigator. Your
track lets you see how your ship has
moved over time.
The track is saved to the hard disk if track recording is activated. A line runs between
each track point. The hard disk stores a maximum of 30,000 track points.
Your track remains on the screen when the power is turned off. You can delete all or
a part of the track from the pop-up menu. All tracks can also be deleted from [Ship &
Track] menu.
2.11.1 How to start, stop recording the track
Start recording
Open the slide-out menu or tap the boat icon, then turn [Track] on.
Stop recording
Method 1: Tap the track, then tap [Stop Track].
Method 2: Open the slide-out menu or tap the boat icon, then turn [Track] off.
2.11.2 How to show or hide the track display
Open the [Layers] menu and turn [Tracks] on or off.
Depth Alarm
Track