Filter
Top Products
1. SYSTEM INTRODUCTION
1-27
1.15 Function Gesture
The function gesture controls what occurs when you tap the screen with two fingers.
Select the function as below.
1. Open the home screen, then select [Settings] - [General].
2. Tap [Function Gesture].
3. Tap a function among the following:
[None]: Nothing happens.
[Screen Capture]: Capture the screen and save it to a micro SD card (or USB
memory). The message shown below appears. Tap [OK] to save the screen cap-
ture. The information following “TZT2SCREENSHOT” is the year, month, day,
hour, minute and second the screenshot was captured.
[Event]: Record an event. Select a mark from the pop-up menu, and the mark is
put at the position at the time the screen was tapped (see paragraph 4.2.2). The
position, etc. is saved to the points list.
[Home]: Open the home screen (see section 1.6).
[Settings]: Open the [Settings] menu (see section 1.14).