Filter
Top Products
4. POINTS, EVENT MARKS
4-2
4.2.2 How to enter an event mark
Method 1: Function gesture
This function is available by touch con-
trol when you tap [Event] in [Settings] -
[General] - [Function Gesture] (see
section 1.15).
1. Tap the screen with two fingers to
show the [Creating Events] pop-up
menu.
2. Tap required event mark.
The following occurs.
• The selected mark is put at the own ship position, on the plotter, radar and sounder
displays, at the moment the mark was selected.
• The event mark is saved to the points list.
Method 2: Slide-out menu
Open the slide-out menu, then tap [Event]. Tap required event mark in the [Creating
Events] pop-up menu.
4.3 How to Display Point, Event Mark Information
Tap a point or event mark to display its information. The information shown depends
on the display in use and the object tapped.
Point, event mark information
(Plotter and radar displays)
Event mark information
(Sounder display)