Filter
Top Products
2. PLOTTER
2-16
2.10.5 Anchor watch alarm
The anchor watch alarm tells you that your ship has moved a distance greater than
the set value when the ship must not be moving.
1. Turn on [Anchor Watch Alarm] in the [Alarm] menu.
2. Tap [Anchor Watch Alarm Value] to display the software keyboard.
3. Set the value, then tap .
4. Tap the close button to finish.
2.10.6 Other Alarm menu items
The followings are the alarm menu items not previously mentioned.
[Hardware Alarm]: This alarm alerts you when something is wrong with the hardware.
[Notification Sound]: Activate or deactivate the notification sound (for "Waypoint
Crossing" (see section 5.8), "End of Route" (section 4.12) or fish finder alarms
(section 7.10)).
[Alarm Sound]: Disable or enable the buzzer.
[Sound Alarm Until Acknowledged]: Turn this item on to sound the aural alarm until
an alarm is acknowledged (see paragraph 2.10.7).
[Save Log File]: Save alert list to micro SD card.
[Reset Default Settings]: Select this menu item to restore default settings for the
[Alarm] menu.
Your ship's position where you
start the anchor watch alarm.
Alarm
setting
: Alarm area