Filter
Top Products
2. PLOTTER
2-18
2.11.3 Track recording interval
In drawing the track, the position of your ship is stored into the memory of this unit at
an interval of time. A shorter interval provides better reconstruction of the track, but
the storage time of the track is reduced.
1. Open the home screen, then tap [Settings] - [Ship & Track].
2. Tap [Track Interval].
3. Tap a time interval.
4. Tap the close button to finish.
2.11.4 Track color
Track can be displayed in a single color or multiple colors. For multiple colors, you can
display the track according to one of the conditions shown below.
• Depth
• SST Range
• SST Variation
• Speed
• Bottom Discrimination
Note: The bottom discrimination method requires a bottom discrimination capable
transducer - bottom discrimination sounder BBDS1, or network sounder DFF1-UHD.
From the home screen
1. Open the home screen, then tap [Settings] - [Ship & Track].
2. Tap [Track Color].
3. Tap [Fixed] or [Variable]. Tap “>” to go back one layer. For [Fixed], go to the next
step. For [Variable], go to step 5.
4. Tap [Fixed Color Setup] then tap a color. Go to step 10.