Filter
Top Products
M440LX Server System Product Guide
103
Diskette Drive
The system comes with a 3.5-inch diskette drive installed in the vertical
3.5-inch peripheral bay.
Contact your sales representative or dealer for a list of approved add-in
peripheral devices.
Removing the Diskette Drive
See Figures 4-13 and 4-14.
1. Observe the warnings and cautions on page 3, “Safety Guidelines.”
2. Remove the right side cover (page 80).
3. Disconnect the power and signal cables from the diskette drive.
4. Remove the screw that secures the drive and carrier assembly to the
chassis, and set it aside.
5. Slide the assembly toward the top power supply to disengage the tabs
from the slots in the chassis wall.
6. Remove the assembly from the chassis, and place it bracket-side up on
an antistatic surface.