Filter
Top Products
212
Chapter 10 Solving Problems
Problems With Application Software
If you have problems with application software, do the following:
1. Verify that the software is properly configured for the system. Refer to
the software installation and operation documentation for instructions
on setting up and using the software.
2. Try a different copy of the software to see if the problem is with the
copy you are using.
3. Make sure all cables are installed correctly.
4. Verify that the system board jumpers are set correctly.
5. Try running the software in a different speed mode. Refer to Chapter 3,
"Configuring The System."
6. If other software runs correctly on the system, contact your vendor
about the failing software.
If the problem persists, contact the software vendor's customer service
representative for assistance.