Filter
Top Products
M440LX Server System Product Guide
77
Installing Video Drivers
After you have configured the system, you can install various video drivers
to take full advantage of its onboard, integrated Cirrus Logic CL-GD54M40
super VGA video controller’s enhanced features. The system may not
operate properly without these video drivers installed.
For the most current information on which video drivers you need, read the
README.TXT file on the Display Drivers and DOS Utilities diskette. To
install drivers from the diskettes, follow the installation instructions in the
README.TXT file.
The video drivers are on the Configuration Software CD. For instructions
on creating Video diskettes, see Chapter 2, “Installing The System.”
To install these video drivers, do this:
1. Fully configure the system. (This may include adding video DRAM
buffer memory, application software, or new ISA or PCI add-in boards.)
2. Insert disk 1 of the video drivers and utilities for MS-DOS and
Windows
†
into drive A.
3. At the DOS command prompt, type
A:install
and press <Enter>.
4. Follow the directions on the monitor to install the video drivers.
If the system does not operate as described in this chapter, follow the
instructions in Chapter 10, “Solving Problems.”
Installing SCSI Drivers
The SCSI drivers are on the Configuration Software CD. For instructions on
creating SCSI diskettes, see Chapter 2, “Installing The System.” To install
the SCSI drivers, follow the instructions in the README.TXT file on the
first diskette.
■
■
■
■
■
■