Filter
Top Products
M440LX Server System Product Guide
87
Replacing the Snap-in Plastic Peripheral Bay Cover
See Figure 4-4.
1. Insert the rigid tabs on the plastic snap-in peripheral bay cover into the
notches along the inside edge of the plastic front panel.
2. Push the top right corner of the plastic cover toward the chassis with an
inward twisting motion to insert the top flexible tab in the slot above the
3.5-inch diskette drive.
3. Gently press on the cover until both the top and bottom flexible tabs
snap into place.
4. Replace the right side cover (page 81).
5. Connect all external cables and power cords to the system. (Some
systems have more than one power cord.)