Filter
Top Products
M440LX Server System Product Guide
83
OM05256
1
2
Figure 4-2. Top Cover
1 Screw
2 Top cover
Replacing the Top Cover
See Figure 4-2.
1. Before replacing the top cover, make sure you did not leave any tools or
loose parts inside the chassis.
2. Ensure that interior cables are properly connected.
3. Position the top cover (Figure 4-2) over the chassis so that the tabs along
the front of the cover align with the slots in the top edge of the chassis.
4. Slide the cover toward the front of the system so that the tabs firmly
engage in the slots in the chassis.
5. Attach the cover to the chassis with the three screws you removed
earlier, and tighten them firmly (6.0 inch-pounds).
6. Replace both side covers. Connect all external cables and power cords
to the system.