Filter
Top Products
M440LX Server System Product Guide
45
Checking the Power Cord(s)
▲
!
WARNING
Do not attempt to modify or use a supplied AC power
cord if it is not the exact type required.
If a power cord supplied with the system is not compatible with the AC
wall outlet in your region, get one that meets the following criteria:
• The cord must be rated for the available AC voltage and have a current
rating that is at least 125% of the current rating of the system.
• The connector that plugs into the wall outlet must be a grounding-type
male plug designed for use in your region. It must have certification
marks showing certification by an agency acceptable in your region.
• The connector that plugs into the AC receptacle on the system power
supply must be an IEC 320, sheet C13, type female connector.
• In Europe, the cord must be less than 4.5 meters (14.76 feet) long, and it
must be flexible <HAR> (harmonized) or VDE certified cordage to
comply with the system's safety certifications.
Turning on Your Server
▲
!
WARNINGS
Ensure that the line voltage selector switch on each power
supply is set to the correct line source voltage (see
page 42). If the setting is incorrect, the power supply will
be damaged when you plug the power cord into an AC
outlet.
The
power button
on the front panel of the server
does not
turn off the AC power. To remove AC power from the
server, you must unplug the AC power cord from each
power supply or wall outlet.
1. Make sure all external devices, such as a monitor, keyboard, and mouse
(optional) have been connected.
2. Remove drive protection cards (if present) from the diskette and tape
drives.
3. Turn on your video monitor.