Filter
Top Products
M440LX Server System Product Guide
81
OM05785
1
2
3
Figure 4-1. Side Covers
1 Retaining screw
2 Metal loop (for padlock)
3 Built-in handle
Replacing a Side Cover
The identical side covers can be installed on either side of the system. See
Figure 4-1.
1. Before replacing the side cover, make sure you did not leave any tools
or loose parts inside the chassis.
2. Ensure that add-in boards are firmly seated in their respective slots,
retaining brackets are firmly secured with screws tightened to
6.0 inch-pounds, and interior cables are properly connected.
3. Position the side cover over the chassis so that the metal tabs across the
top and bottom edges of the cover align with the slots in the top cover
and bottom edge of the chassis. Slide the cover toward the front of the
system so that the tabs along the front edge of the cover firmly engage
in the front slots of the chassis.