Filter
Top Products
M440LX Server System Product Guide
97
Add-in Boards
The system board provides seven PCI bus master slots and three ISA bus
master slots. They accept any add-in PCI and ISA boards. One PCI
connector shares a common chassis I/O expansion slot with an ISA
connector; you can use either PCI slot or ISA in the slot, but not both.
▲
▲
!
CAUTIONS
Do not overload the system board by installing add-in
boards that draw excessive current. For expansion slot
current limitations, see Chapter 7, “Power System.”
Add-in boards can be extremely sensitive to ESD and
always require careful handling. After removing the board
from its protective wrapper or from the system board, place
it component-side up on a nonconductive, static-free
surface. Do not slide the board over any surface.
✏
Note
If you are installing or removing an ISA add-in board, you
must run the SCU to reconfigure the system. Running the
SCU is optional for a PCI add-in board.