Filter
Top Products
M440LX Server System Product Guide
107
Installing a 5.25-inch Peripheral Device
See Figures 4-15, 4-16, 4-17, and 4-18.
1. Observe the warnings and cautions on page 3, “Safety Guidelines.”
2. Remove both side covers and the top cover (page 80).
3. Remove the snap-in plastic peripheral bay cover (page 86), and place it
on a smooth surface so that it doesn’t get scratched.
4. Remove the screws and filler panel, and set them aside.
OM05315
Figure 4-15. Filler Panels
5. Push the tab on the left side of the EMI metal shield to the right to
disengage it from the chassis. Save the shield.
6. Remove the device from its packaging, and place it on an antistatic
surface.
7. Record the device model and serial number in your equipment log.
8. Set any jumpers and/or switches on the device according to the
manufacturer’s instructions.