Filter
Top Products
M440LX Server System Product Guide
121
2. Remove both side covers and the top cover (page 80).
3. Disconnect the fan power cable connector from the fan header on the
hot-docking backplane.
4. Press the top outer flexible tab on the plastic housing and fan assembly
toward the fan until you can pull the tab through the slot in the chassis.
5. Pull the top of the assembly toward the hot-docking bays to disengage
the bottom flexible tab.
6. Remove the assembly from the chassis, and place it—fan-side down—
on a flat surface.
OM05767
Figure 4-23. Fan Below the Top Power Supply