Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-70 F-70
INVERTEC STT
15. Place the machine on its side as shown in
Figure F.35. Slide the plastic retaining insu-
lators that go through the base of the
machine to one side. Pull the through-bolts
out of the machine, being careful to save all
the insulation and standoff material. Set
aside for reassembly.
16. Remove the switch board and capacitor
assembly from the machine.
FIGURE F.35 – REMOVING THROUGH-BOLTS
CAPACITOR REMOVAL AND REPLACEMENT PROCEDURE (continued)
PLASTIC RETAINING
INSULATORS