Filter
Top Products
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-20 F-20
INVERTEC STT
T4 AUXILIARY TRANSFORMER TEST (continued)
FIGURE F.3 – OUTPUT CHOKE/IGBT MODULE SPLICED CONNECTION
LOWER
TRAY
AREA
OUTPUT CHOKE/
DARLINGTON MODULE
SPLICED CONNECTION
TEST PROCEDURE
1. Turn off the Invertec STT and disconnect
main AC input power to the machine.
2. Using the 5/16" nut driver, remove the case
wraparound cover.
3. Perform the Input Filter Capacitor
Discharge Procedure. See the
Maintenance section.
ELECTRIC SHOCK can kill.
• Before continuing with
the test procedure, per-
form the capacitor dis-
charge procedure to
avoid electric shock.
4. Locate the lead connection splice from the
output choke to the IGBT module. Remove
the insulating sleeve. Cut any necessary
cable ties. Using the 7/16" wrench, discon-
nect the lead splice. Thread the lower lead
down into the lower tray assembly area.
See Figure F.3.
WARNING