Filter
Top Products
C Commands Summary
104 MiLLennium Command Descriptions Manual
SAVEALMA
This command saves the latest almanac in non-volatile memory.
The option
ONNEW is the default; if a different setting is used, a SAVECONFIG command must be issued or else
ONNEW will resume after a reset.
Bit 21 in the receiver self-test status word (see Table D-5, Appendix D) indicates whether the latest almanac
received by the GPS receiver is newer than the almanac saved in non-volatile memory (NVM).
Syntax:
➀The disable option must be followed by the SAVECONFIG command to have an effect.
SAVEALMA option
Command Range Values Description Default
SAVEALMA - Command
option (none) The latest received almanac is saved in NVM.
onnew Each almanac is saved in NVM upon reception unless if it is newer than the one
already stored. This will occur continuously.
onnew
onnext The next received almanac will be saved in NVM unless it is identical to the one
already stored. This only occurs once.
stop Stops auto saving.
disable ➀ Stops auto saving and prevents the use of the almanac, saved in NVM, on startup.