Filter
Top Products
J Listing Of Tables
228 MiLLennium Command Descriptions Manual
Table 2-2 GPSCard Command Summary (continued)
MAGVAR Set magnetic variation correction magvar value
MESSAGES Disable error reporting from command interpreter messages port,option
POSAVE Implements position averaging for reference station posave maxtime, maxhorstd, maxverstd
RESET Performs a hardware reset (OEM only) reset
RINEX Configure the user defined fields in the file headers rinex cfgtype
RTCM16T Enter an ASCII text message to be sent out in the RTCM
data stream
rtcm16t ascii message
RTCMRULE Set variations of the RTCM bit rule rtcmrule rule
RTKMODE Set up the RTK mode rrtkmode arguement, data range
SAVEALMA Save the latest almanac in non-volatile memory savealma option
SAVECONFIG Save current configuration in non-volatile memory (OEM
only)
saveconfig
SEND Send an ASCII message to any of the communications
ports
send port ascii-message
SENDHEX Sends non-printable characters in hexadecimal pairs sendhex port data
SETDGPSID Enter in a reference station ID setdgpsid option
SETHEALTH Override PRN health sethealth prn,health
RESETHEALTH Reset PRN health resethealth prn
RESETHEALTHALL Reset all PRN health resethealthall
SETL1OFFSET Add an offset to the L1 pseudorange to compensate for
signal delays
setL1offset distance
SETNAV Set a destination waypoint setnav from lat,from lon,to lat, to lon,track offset,
from port,to port
SETTIMESYNC Enable or disable time synchronization settimesync flag
UNDULATION Choose undulation undulation separation
VERSION Current software and hardware information version