Filter
Top Products
G Geodetic Datums
MiLLennium Command Descriptions Manual 217
Notes:
* Default user datum is
WGS84.
* Also see the
DATUM and USERDATUM commands in Chapter 2 and Appendix C.
* The GPSCard
DATUM command sets the Datum value based on the name entered as listed in the "NAME"
column in Table G-2 (e.g., NAD83).
* The following GPSCard logs report Datum used according to the "GPSCard Datum ID" column:
POSA/
B, PRTKA/B, RTKA/B, and MKPA/B.