Filter
Top Products
C Commands Summary
108 MiLLennium Command Descriptions Manual
SETDGPSID
This command is used to enter a station ID. Once set, the receiver will only accept differential corrections from a
station whose
ID matches the set station ID. It is typically used when a station has data links containing RTCM or
RTCA messages from several stations. By entering a specific station ID, the operator can select which station to
listen to. Having set a station
ID, incoming, RTCM, RTCMA, RTCA, RTCAA, and RTCAB messages will be received
from only that station. When a valid station
ID is entered, an improved data synchronization algorithm will be used.
It is recommended to always set the station
ID. This command can also be used to set the station ID for a GPSCard
reference station. See
FIX POSITION 4th parameter (station ID).
Note: The SETDGPSID command does not affect RT2 or RT20 when using any of the possible messages RTCM59,
RTCAOBS and RTCAREF.
Syntax:
Example 1: SETDGPSID 1023
Example 2: SETDGPSID “abcd”
SETDGPSID station ID #
SETDGPSID all
Syntax Range Value Description Default
SETDGPSID Command
station ID # 0 - 1023
or
“xxxx”
or
all
Reference station ID number for RTCM
Reference station name for RTCA where ”xxxx” are four
alphanumeric characters, entered between double quotes
Accepts differential corrections from any station
all