Filter
Top Products
Hint
To set this function to [Off], press PING, AMP MENU and ENTER on the receiver at the
same time.
[119] Adjusting Settings
Easy Setup
Setting up the receiver using the Easy Setup
When you turn on the receiver for the first time or after the receiver is initialized, the Easy
Setup screen appears on the TV screen. You can set up the following settings for the
receiver by following the instructions on the Easy Setup screen.
Auto Calibration
Perform automatic calibration in accordance with your speaker system configuration and
arrangement.
Internet Setup
Configure settings to connect the receiver to the network.
Note
Switch the input of the TV to the input to which the receiver is connected to use this
function.
If the Easy Setup screen does not appear or you want to display the Easy Setup screen
manually, you can display it by selecting [Setup] - [Easy Setup] from the home menu.
[120] Adjusting Settings
Using the menu on the display panel
Operating the receiver with the menu on the display
panel
You can operate this receiver using the display panel even if the TV is not connected to the
receiver or the TV is turned off.
1. Press AMP MENU.
The menu is displayed on the display panel of the receiver.
2. Press / repeatedly to select the menu you want, then press .
3. Press / repeatedly to select the parameter you want to adjust, then press .