Filter
Top Products
The display panel provides various information on the status of the receiver, such as the
sound field.
1. Select the input for which you want to check information.
2. Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will change cyclically as follows:
Input name you entered (*1) or default input name, Sound field currently applied (*2) →
Input name you entered (*1) or default input name, Stream information (*3) → Input
name you entered, default input name (*1)
When listening to FM and AM radio
Band, Preset number, Preset station name (*1), Sound field currently applied (*2) →
Band, Preset number, Frequency, Sound field currently applied (*2)
*1
Index name appears only when you have assigned one to the input or preset station. Index name
does not appear if only blank spaces have been entered or it is same as the input name.
*2
[PURE.DIRECT] appears on the display panel when the Pure Direct function is activated.
*3
Stream Information is not displayed when analog signals are input. This may happen even when
digital signals are input.
Note
Characters or marks in some languages may not be displayed.
[60] Adjusting Settings
Input Setup
Changing the assignment and display for the input jacks
You can customize the settings for each input according to your preferences and usage.
Select [Setup] - [Input Setup] from the home menu, then set each item shown below.
Input
You can change the settings of [Icon], [Name], [Watch/Listen], [Show/Hide], [HDMI],
[OPTICAL / COAXIAL], [COMPONENT], [VIDEO IN], [AUDIO IN], [Input Mode], [Preset
Sound Field], [In-Ceiling Speaker Mode], [A/V Sync], [Subwoofer Low Pass Filter],
[Subwoofer Level], [Trigger 1] (for STR-ZA3000ES), [Trigger 2] (for STR-ZA3000ES),
[Trigger 3] (for STR-ZA3000ES) and [Trigger] (for STR-ZA2000ES/STR-ZA1000ES) for the
desired input.
Note
The settings of [AUDIO IN] on the Input Setup screen are fixed.