Filter
Top Products
VIDEO IN: HDMI OUT (*1), MONITOR VIDEO OUT (*2), ZONE2 VIDEO OUT (*2)
*1
Video signals are upconverted and upscaled (up to 4K) when outputting to HDMI OUT A jack.
Video signals are upconverted but video resolution is the same as the input video source when
outputting to HDMI OUT B jack.
*2
The same type of signal as the input signal is output.
Note
When video signals from a VCR, etc., are upconverted on this receiver and then viewed
on your TV, the image on the TV screen may appear distorted horizontally or no image
may be seen depending on the status of the video signal output.
If you are using image improvement circuitry with your VCR, it may impact the video
signal conversion. It is recommended that you turn off this function on your VCR.
Converted HDMI image output does not support “x.v.Color,” Deep Color, or 3D.
HDMI video signals cannot be converted to component video signals or video signals.
1080p component video signals cannot be upconverted.
When [4K Scaling] is set to [Auto], if the HDMI input signals are 1080p@23.98/24 Hz and
a 4K-compatible TV is connected to HDMI OUT A jack, the HDMI input signals are
automatically upscaled to 4K images and output from the HDMI OUT A jack.
When [HDMI Out B Mode] is set to [Zone2], component video signals or video signals
selected in zone 2 can be output from the HDMI OUT B jack.
If you select different component video signals or video signals in the main zone and
zone2 when [HDMI Out B Mode] is set to [Zone2], only audio signals can be output from
HDMI OUT B jack and the screen will blackout.
[5] Preparation
Before using
Digital audio formats supported by the receiver
The digital audio formats that this receiver can decode depend on the digital audio output
jacks of the connected device. This receiver supports the following audio formats. The words
in brackets are those indicated on the display panel.
Dolby Digital [DOLBY DIGITAL]
Maximum number of channels: 5.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI
Dolby Digital EX [DOLBY DIGITAL EX]
Maximum number of channels: 6.1
Connection with the receiver: COAXIAL/OPTICAL, HDMI
Dolby Digital Plus [DOLBY DIGITAL+] (*)