Filter
Top Products
connected via HDMI connection to the receiver.
Change the TV channel if you want to watch a TV broadcast.
Be sure to select the correct device or input when watching a program from a device connected to
the TV. Refer to the section on this operation in the operating instructions of the TV.
Sound is not output if you use [2ch Analog Direct] when an HDMI input or digital input
(COAXIAL, OPTICAL) is selected. Use another sound field.
When using the Control for HDMI function, you cannot control connected devices using
the remote control of the TV.
Some devices and TVs need to be set up. Refer to the operating instructions supplied with each
device and TV.
Change the input of the receiver to the HDMI input connected to the device.
Check that the selected digital audio input jack is not assigned to another input.
[149] Troubleshooting Sound
The left and right sound is unbalanced or reversed.
Check that the speakers and device are connected correctly and securely.
Adjust the sound level parameters using the Speaker Setup menu.
[150] Troubleshooting Sound
Dolby Digital or DTS multi-channel sound is not
reproduced.
Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
When connecting the DVD player, etc., to the digital input jacks of this receiver, make
sure the digital audio output setting of the connected device is available.
Set [Audio Out] to [AMP] in the HDMI Setup menu.
You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and
Multi Channel Linear PCM with an HDMI connection.
[151] Troubleshooting Sound
The surround effect cannot be obtained.