Sony STR-ZA3000ES/STR-ZA2000ES/STR- ZA1000ES Marine Radio User Manual


 
FM band: FM 1 to FM 30
[29] Enjoying Video and Sound Listening to the radio
Tuning to a station directly (Direct Tuning)
You can enter the frequency of a station directly.
1. Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
If the Simple mode screen appears, switch to the Full mode screen.
2. Press / / / to select the Frequency indication and then press .
3. Enter the frequency using / / / .
i. Press
/ to select a digit.
ii. Press
/ to change the digit.
4. Press .
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] or [---- kHz] appears and
then the screen returns to the current frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still
cannot tune to a station, the frequency may not be in use in your area.
Hint
Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to
an AM station.
The tuning scale for direct tuning is shown below:
USA and Canada
FM: 100 kHz
AM: 10 kHz (*)
other area
FM: 50 kHz
AM: 9 kHz
*
The AM tuning scale can be changed. For details, see “Changing the AM tuning scale.”