Filter
Top Products
Recommended setting when a TV is connected directly to HDMI OUT B jack.
Sound is output from the TV speakers and the speakers connected to the receiver.
Zone2 AMP:
Recommended setting when another amplifier is connected to HDMI OUT B jack.
Sound is output from the another receiver connected to HDMI OUT B jack.
Sound is not output from ZONE 2 SPEAKER OUT terminals and ZONE 2 AUDIO
OUT jacks.
Note
You can only configure this setting only when [HDMI Out B Mode] is set to [Zone2].
When a video device (projector, etc.) is connected to the ZONE 2 HDMI OUT jack, sound
may not be output from the receiver. In this case, set [Zone2 Audio Out] to [AMP].
When a TV which does not support audio content protection is connected to the HDMI
OUT B jack, specific audio may not be output from the receiver. In this case, set [Zone2
Audio Out] to [AMP].
When [Zone2 Audio Out] is set to [Zone2 TV + AMP] or [AMP], audio signals will be
downmixed. The following restrictions apply to downmixing.
Audio signals are not output to zone 2 when receiving a DSD signal.
If you change the sound field or speaker settings in the main zone while the input for zone 2 is set
to SOURCE or the same input is selected in the main zone and zone 2, the sound may also be
momentarily interrupted in zone 2.
The D.L.L. function does not work in the main zone.
The volume level of sound from ZONE 2 SPEAKER OUT terminals and HDMI OUT B jack may be
different from sound that is not downmixed.
No sound will be output to zone 2 if you play a DTS-CD with different HDMI inputs
selected in the main zone and zone 2.
You cannot remedy the time gap between video output on the TV connected to HDMI
OUT B jack and audio output from the speaker connected to ZONE 2 SPEAKER OUT
terminals using the A/V Sync function.
[95] Adjusting Settings
HDMI Setup
Setting the level of the subwoofer (Subwoofer Level)
You can set the level of the subwoofer to 0 dB or +10 dB when multi-channel PCM signals
are input via an HDMI connection. The level for each input to which an HDMI input jack is
assigned can be set independently.
1. Select [Setup] - [HDMI Setup] from the home menu.