Filter
Top Products
Displays the auto calibration menu on the display panel of the receiver to perform Auto
Calibration.
11. MEMORY
Press to enter the Memory mode of the tuner.
12. PRESET +/–
Press to select the preset stations.
13. FM/AM
Press to select the band you want.
14. INPUT +/–
Press to select the input source.
15. INPUT MODE
Press to select the input mode.
16. ZONE2 , ZONE3
Turns the receiver in zone 2 or zone 3 on or sets it to the standby mode.
17. HDMI OUTPUT
Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B
jacks.
18. Input buttons
Select the device you want to use.
When you press any of the input buttons, the receiver turns on.
19. SOUND OPTIMIZER
Press to use the Sound Optimizer to enjoy clear and dynamic sound at low volume
levels.
20. CUSTOM PRESET (1, 2, 3, 4)
Saves and recalls various settings for the receiver.
21. DISPLAY
Displays information on the TV screen.
22. RETURN
Returns to the previous menu.
23. SP SETUP
Displays the Speaker Setup menu.
24. TEST (PICTURE, TONE)
Press to output the test picture or test tone.
25. SOUND FIELD (2CH/A.DIRECT, A.F.D., MOVIE, MULTI ST.)
Selects the sound field you want.
26. TUNING +/–
Press to select a station.
27. + (*)/-
Adjust the volume level.
28.
Turns off the sound temporarily. Press the button again to restore the sound.
*
The + button has tactile dot. Use the tactile dot as a reference when operating the receiver.