Filter
Top Products
If an error code or warning message appears on the screen in step 3, see “List of
messages after Auto Calibration measurements.”
Hint
You can also perform automatic calibration by pressing the AUTO CAL button on the
remote control. If you use the AUTO CAL button, the following restrictions apply to the
operation:
Prior settings relating to the Auto Calibration will be skipped.
You can only use the display panel for the operation.
The Auto Calibration function will be canceled if you perform the following during the
measurement process:
Turn the receiver on or off.
Press the input buttons on the remote control or on the receiver.
Press
.
Press SPEAKERS on the receiver.
Press HDMI OUTPUT.
Press AMP MENU.
Press HOME.
Press AUTO CAL.
Change the volume level.
[63] Adjusting Settings Speaker Setup
Calibrating the phase characteristics of the speakers
(Automatic Phase Matching)
You can set the A.P.M. (Automatic Phase Matching) function in the D.C.A.C. (Digital Cinema
Auto Calibration). This calibrates the phase characteristics of the speakers for well-
coordinated surround sound.
1. Select [Setup] - [Speaker Setup] from the home menu.
2. Select [Automatic Phase Matching].
3. Select the setting you want.
Auto: Switches the A.P.M. function on or off automatically.
Off
Note
This function does not work in the following cases: