Filter
Top Products
Connect a router to one among ports 1 to 8 of the receiver using only one LAN cable. Do
not connect the same router to the receiver using more than one LAN cable. It may cause
a malfunction.
Ports No. 1 and No. 2 support PoE (Power over Ethernet, Alternative A). If you connect a
PoE-compatible device to one of these ports, power will be supplied to the device from
the receiver.
You can also connect a device that does not support PoE to the PoE port.
The PoE port lights in red while supplying power.
This receiver supports PoE Class 3.
[21] Preparation
Connecting to the network
Connecting the receiver to the network (for STR-
ZA2000ES/STR-ZA1000ES)
The following illustration is an example configuration of a home network with the receiver,
and a computer.
Computer
LAN cable (not supplied)
Router
Modem
Internet
[22] Preparation Turning on the receiver/preparing the remote control
Inserting batteries into the remote control