Filter
Top Products
Reference Manual
00809-0100-2230, Rev BB
August 2014
Rosemount 2230
5-22
Section 5. Service and Troubleshooting
5.7.4 Reset/Restore The Service Tools/Maintenance option lets you restart the Rosemount 2230
Display if needed. You may also reset the 2230 to factory configuration:
1. In AMS Device Manager open Service Tools as shown in “Service Tools
Window” on page 5-17.
2. In the Navigation Pane select the Maintenance option.
3. Select the Reset/Restore tab.
4. Click the desired button. You may choose between the following options:
• Restart communication - restarts the Foundation fieldbus
communication
• Factory Reset - Device Configuration. This option will reset the device
specific configuration to the factory settings.
• Factory Reset - FF I/O Board. This option will reset the Foundation
fieldbus communication board to the factory configuration
5. Click the OK to close the window when finished.