Filter
Top Products
Reference Manual
00809-0100-2230, Rev BB
August 2014
Rosemount 2230
C-8
Appendix C. FOUNDATION fieldbus Block Information
C.3 MAIN TRANSDUCER BLOCK
The Main Transducer (TB1100) block contains parameters for configuration of
the Rosemount 2230 Graphical Field Display. It contains device information
including diagnostics and the ability to configure, set to factory defaults and
restart the 2230 Display.
Table C-4. Main Transducer
Block parameters
Index
Number Parameter Description
1 ST_REV The revision level of the static data associated with the
function block. The revision value increments each time a
static parameter value in the block is changed.
2 TAG_DESC The user description of the intended application of the
block.
3 STRATEGY The strategy field can be used to identify grouping of
blocks. This data is not checked or processed by the block.
4 ALERT_KEY The identification number of the plant unit. This information
may be used in the host for sorting alarms, etc.
5 MODE_BLK The actual, target, permitted, and normal modes of the
block.
Target: The mode to “go to”
Actual: The mode the “block is currently in”
Permitted: Allowed modes that target may take on
Normal: Most common mode for target
6 BLOCK_ERR This parameter reflects the error status associated with the
hardware or software components associated with a block.
It is a bit string, so that multiple errors may be shown.
7 UPDATE_EVT This alert is generated by any change to the static data.
8 BLOCK_ALM The 2230 transducer block does not support update of
BLOCK_ALM information, and it does not publish
BLOCK_ALM on segment/FF bus.
9 TRANSDUCER_DIRECTORY Directory that specifies the number and starting indices of
the transducers in the transducer block.
10 TRANSDUCER_TYPE Identifies the transducer.
11 XD_ERROR A transducer block alarm subcode. Provides additional
error codes related to transducer blocks.
12 COLLECTION_DIRECTORY A directory that specifies the number, starting indices, and
DD Item ID’s of the data collections in each transducer
within a transducer block.
13 TRANSDUCER_TYPE_VER
14 HOUSING_TEMPERATURE Temperature inside device housing
15 HOUSING_TEMP_UNIT Measurement unit for temperature
16 ENV_DEVICE_MODE Restart/Reset Device to factory default
17 DIAGN_DEVICE_ALERT Tank Hub diagnostic information, see Table C-5 on
page C-9.
18 DEVICE_VERSION_NUMBER Device software version number
19 DIAGN_REVISION Internal revision number
20 SERIAL_NO Main Label Device ID (serial number)
21 STATS_ATTEMPTS Internal communication attempts
22 STATS_FAILURES Internal communication failures
23 STATS_TIMEOUTS Internal communication timeouts
24 FF_WRITE_PROTECT FF write protect status. The device is write protected by a
hardware switch.
25 P1451_SLAVE_STATS P1451 Slave Stats