Filter
Top Products
Reference Manual
00809-0100-2230, Rev BB
August 2014
Rosemount 2230
5-26
Section 5. Service and Troubleshooting
Software Write Protection in AMS
When the Rosemount 2230 Display is used in FOUNDATION fieldbus systems it
can be software write protected in order to prevent changes of the
configuration database and FIELDBUS parameters.
To enable software write protection:
1. Open the AMS Device Manager Software.
2. Select the Configure>Manual Setup option.
3. Select the Device tab.
4. Enable write protection by clicking the Write Protect Device button.
When the 2230 is software write protected, the push buttons on the front
of the 2230 housing can no longer be used to change device
configuration. All holding registers and Fieldbus parameters will be
protected.
Write protection can be disabled at anytime by clicking the Write Protect
Device button again.
Configure
Manual Setup