Filter
Top Products
Reference Manual
00809-0100-2230, Rev BB
August 2014
3-3
Rosemount 2230
Section 3. Installation
3.2.2 Mounting the
Graphical Display
The Rosemount 2230 Graphical Field Display is designed for mounting on a
plate, wall, or pipe.
Mounting on a Plate
The 2230 display can be mounted on a plate by attaching four M4 screws to
the back of the display. To mount the 2230:
1. Drill four holes in the plate according to the hole pattern on the back of
the 2230 display as illustrated in Figure 3-2.
2. Mount the 2230 on the plate using four M4 screws. Note that the M4
screws that are shipped with the 2230 display can be used as long as the
plate thickness does not exceed 5 mm (0.2 in.).
Figure 3-2. Mounting hole
pattern
68 mm (2.7 in.)
60 mm (2.4 in.)