Filter
Top Products
Reference Manual
00809-0100-2230, Rev BB
August 2014
C-9
Rosemount 2230
Appendix C. FOUNDATION fieldbus Block Information
C.3.1 Diagnostic
Device Alerts
Table C-5 lists conditions reported in the DIAGN_DEVICE_ALERT parameter.
Table C-5. Diagnostic Device
Alerts
26 P1451_HOST_STATS P1451 Host Stats
27 SB_HEART_BEAT_CNT This number should be incrementing. It is an indication that
the device is alive.
28 SLAVE_REQ_ID Slave request ID
29 DEVICE_COMMAND Device command
30 DEVICE_STATUS Sensor application device status
31 FF_SUPPORT_INFO
32 SENSOR_DIAGNOSTICS
33 MODEL_CODE Shows device model code
34 RAW_DISPLAY_DATA_1 Raw Display Data
35 RAW_DISPLAY_DATA_2 Raw Display Data
36 RAW_DISPLAY_DATA_3 Raw Display Data
37 RAW_DISPLAY_DATA_4 Raw Display Data
38 DEVICE_MODEL Shows device model
39 DISPLAY_LANGUAGE Select the preferred language to use for the display. If
Default is selected then the language is determined by the
model code.
40 DISPLAY_VIEW_MODE The preferred view is selected; Single Value, Two Values
or Four Values. The Single Value view presents large-size
digits, 25 mm.
41 DISPLAY_TOOGLE_TIME The time each value or set of values are shown on the
display: 2-30 s.
42 CONNECTED_TANKS Connected tanks
43 DISPLAY_OPTIONS Display options
44 DISPLAY_UNIT_LENGTH Unit for all length parameters shown on display
45 DISPLAY_UNIT_VOLUME Unit for all volume parameters shown on display
46 DISPLAY_UNIT_TEMPERATURE Unit for all temperature parameters shown on display
47 DISPLAY_UNIT_LEVELRATE Unit for all level rate parameters shown on display
48 DISPLAY_UNIT_FLOW_RATE Unit for all level rate parameters shown on display
49 DISPLAY_UNIT_PRESSURE Unit for all level rate parameters shown on display
50 DISPLAY_UNIT_DENSITY Unit for all density parameters shown on display
Value Description
No alarm active
0x00100000 Database error
0x00200000 Hardware error
0x00400000 Configuration error
0x00800000 Software error
0x20000000 Simulation mode
0x40000000 Write protected